Technical Articles

-Fusion AP Troubleshooting
This article features a selection of common problems applicators have experienced with the Fusion AP spray gun along with the cause and solution.

-Probler P2 Troubleshooting
This article features a selection of common problems applicators have experienced with the Probler P2 spray gun along with the cause and solution.

-Reactor Error Codes
Troubleshooting guide to help diagnose causes of error codes and faults. This guide should be used in conjunction with the standard Reactor manuals.

-Reactor E24 Errors
Troubleshooting guide to help diagnose and repair E24 error codes on your Graco electric Reactor spray machine.

-SPF Testing Guide
This guide is designed to outline the procedures involved in spray foam density, adhesion and cohesion testing.

-SPF Surface Prep Guide
Spray foam can be applied to a wide variety of substrates. Good adhesion is achieved by proper surface preparation.

-Drum Disposal
It is not permissible to re-use or to dispose of emptied isocyanate drums, unless they are decontaminated completely.

-SPF Ventilation Guide
This document is intended to provide general guidance on ventilation during installation of interior applications of spray polyurethane foam.

-SPF Estimating Guide
Compiled by the SPFA Technical Committee to include just about anything that could accept an SPF application. 64 pages of tables and calculations galore.

-Spray Foam Blisters
In this document we will examine the types of SPF blisters, their causes and methods to prevent their formation.

-Blister & Pinhole Troubleshooting
When applying fast set coatings the causes can be difficult to diagnose. In this article we hope to give a better understanding of the reasons they occur.

-Conversion Chart
Find standard conversion factors in this easy to use conversion table of common units and measurements.